∷ Product Introduction ∷ 
 Characteristics: the LT-FA series torque sensor is a torque sensor developed in the standard measure torsional strain sensor based on a specialized torque transmission parameters. LT - FA torque and speed sensor, the LT-FA series torque sensor, the form of double flanged base mounting. Easy installation, compact size. This series torque sensors have: 1. Torque measurement capabilities; energy and signal non-contact transmission function, the output signal digital functions. Can pass the static torque signal, rotation torque signal, dynamic torque signal. static torque signal. signal transmission and whether the rotation speed and direction has nothing to do. Can be adapted to long, high-speed operation. High precision, good stability; small size, light weight, easy to install; 7 without repetition zero can be continuously passed reversing the torque signal; 8. Slip ring and other wear and tear can long-running speed; strong anti-jamming; can be anywhere, installed in any direction; Second, the technical indicators. range: 5,10,20,50,100,200,500,1000,2000 N · m, 10000N m;, non-standard range and size of the five Dimensions can be customized. Accuracy: 0.5% F · S; applicable rotational speed of 3000 rev / min. Ambient temperature: 0 ℃ -50 ℃ 5. Frequency response: 100 μs7 output signal: 0-12v square wave frequency; load current <10mA. zero torque: 10 KHZ; positive full scale: 15 KHZ; reverse full scale: 5 KHZ; Signal sockets: (1) 0V. (2) +15 V. The (3)-15V. (4) empty. (5) torque signal. Installation 1. LT - FA dual flange torque sensor the stationary shell and rotating disk is composed of two parts. 2. Flange coupling connected with the power or load. Stationary shell flexibility in the base allows the swing, not rotation. Signal processing. LT-N1 series torque meter displays torque value. Two. Directly to the torque-frequency signals sent to a computer or PLD processing; Converted to 4-20mA or 1-5V analog signal, use: 1. Wiring must be correct; 2. ± 15V range: shall not be less than shall not exceed ± 14.5V ± 15.5V; 3. Signal line output may not , the power short-circuit, the output current is not greater than 10mA; shield of shielded cable with ± 15V power supply common (power ground) connection. Use If in doubt please contact the company, within the warranty period shall not disassemble.